50A 5-26V High Power MOS Trigger Switch Driver Module
= Field Effect Tube PWM Regulation Electronic Switch Control =
This highpower MOS trigger switch module handles 50A loads with 526V input. Using field effect transistor technology, it provides PWM regulation for heavy-duty electronic switching applications.
High Current Capacity - 50A continuous load handling
Wide Operating Range - 5V to 26V DC input
Use appropriate gauge wire for 50A connections
Add heatsink for loads above 30A
Do not exceed 50A current rating
= Technical Specifications =
| Parameter | Value |
|---|
| Load Current | 50A max |
| Input Voltage | 5V to 26V DC |
| Trigger Voltage | 3.3V to 24V |
| Control Method | PWM / Digital |
| MOSFET Type | N-Channel |
| On-Resistance | 4mΩ typical |
| Switching Speed | Microseconds |
= Key Features =
High Current Capacity - 50A continuous
Low OnResistance Minimal power loss
PWM Compatible - Speed and power control
Optocoupler Isolation - Protected input
Fast Switching - Microsecond response
== Applications ==
- DC motor speed control
- Battery management systems
- Inverter switching
- Industrial equipment control
- Solar charge controllers
- Power distribution switching
Industrial Grade Reliable heavyload switching
Efficient Design - Low heat generation
√ Terminal blocks for secure wiring
√ Opto-isolated input protection
√ Status indicator LED
= Connection Guide =
Power connections:
- VIN+: Positive input (5-26V)
- VIN-: Input ground
- LOAD+: Load positive connection
- LOAD-: Load negative connection
- SIG: Trigger/PWM input
- SIG-: Signal ground
Use 10mm² cable for 50A
Mount on metal surface for cooling
Ensure tight terminal connections
Use proper fusing for protection
= Wiring Requirements =
Cable sizing for 50A:
- Minimum 10mm² copper wire
- Use heat-resistant insulation
- Keep cables as short as possible
- Use ring terminals for connection
Double-check all connections
Add fuse rated at 60A
Loose connections cause overheating
Use proper crimping tools
= Control Methods =
Digital control:
- Apply 5V for full on
- Apply 0V for off
- Fast switching capability
PWM control:
- Frequency up to 20kHz
- Duty cycle controls average output
- Smooth motor speed regulation
Simple Operation - Logic level trigger
Versatile Control - PWM for fine regulation
Used in industrial applications
Proven reliable design
√ Control input isolated from power
√ Works with Arduino and PLC
√ Reverse polarity protected
= Thermal Management =
Important for 50A operation:
- Active cooling recommended for high loads
- Use thermal paste between module and heatsink
- Monitor temperature during operation
- Derate current above 40°C ambient
Use fan for continuous high load
Mount with thermal compound for best transfer
Do not touch during operation
Allow cooling between heavy cycles
= Protection Features =
Built-in safeguards:
- Over-temperature shutdown
- Overcurrent protection
- Reverse polarity protection
- Gate drive protection
Safe Operation - Multiple protection layers
Reliable Design - Industrial components
√ Short circuit protected
√ Thermal shutdown included
√ Input isolation for safety
= Troubleshooting =
Module not switching:
- Verify trigger voltage
- Check power connections
- Avoid low trigger signal
Overheating:
- Add active cooling
- Reduce load current
- Avoid continuous max load
Voltage drop:
- Check cable gauge
- Verify connections tight
- Avoid undersized wiring
 2.png "Buy MQ-5 Gas Sensor Module for KSH 600 – HIMA TRONICS Mombasa – Quality electronics in Mombasa, Kenya")
