470µF 16V Aluminum Electrolytic Capacitor

Name: 470uf 10v Aluminum Electrolytic Capacitor
Brand: HIMA TRONICS
SKU: HMJ825
Price: 20.00 KES
Availability: OutOfStock

= High-Capacitance Filtering and Smoothing Capacitor for Power Applications =

The 470µF 16V aluminum electrolytic capacitor is a widely used generalpurpose component for power supply filtering, decoupling, and audio applications. It is available in throughhole radial and surface-mount (SMD) packages to suit various PCB designs.

Capacitance: 470µF ±20% tolerance

Voltage Rating: 16V DC

Common applications: Power supply smoothing, DC-DC converter filtering, audio coupling and bypass

Observe correct polarity - aluminum electrolytic capacitors are polarized devices. Reversing voltage can cause permanent damage or explosion.

Do not exceed the rated voltage of 16V DC to prevent capacitor failure.

= Key Specifications (Typical Variants) =

The 470µF 16V capacitor is available in a wide range of series and performance grades:

Parameter	Through-Hole Example	SMD Example	Notes
Capacitance	470µF ±20%	470µF ±20%	Standard tolerance
Voltage Rating	16V DC	16V DC	Maximum continuous voltage
Operating Temp.	-55°C to +105°C	-55°C to +105°C	Wide temperature range
Lifetime @ Temp.	3000-7000 hours @ 105°C	2000-5000 hours @ 105°C	Depends on series
ESR/Impedance	90mΩ to 170mΩ	80mΩ to 200mΩ	Low impedance variants available
Ripple Current	615mA to 865mA	450mA to 850mA	Higher ripple current indicates better AC handling
Package Type	Radial (Through-Hole)	SMD	Multiple form factors

= Common Package Options =

Mounting Type	Approximate Size	Lead Pitch	Common Use
Through-Hole Radial	8mm x 20mm	3.5mm	Generalpurpose, lowESR designs
Through-Hole Radial	10mm x 14mm	5mm	Standard general-purpose
Surface Mount (SMD)	8mm x 10.5mm	N/A	High-density PCB designs
Surface Mount (SMD)	10mm x 10.5mm	N/A	Compact SMD applications

= Key Features =

Good Capacitance per Volume - Provides moderate capacitance in a compact package

Wide Performance Range Available in lowESR, longlife, and highripple variants

CostEffective One of the most affordable capacitor types for general use

Wide Availability A standard value from many manufacturers (Nichicon, Panasonic, ChemiCon, Rubycon)

== Applications ==

Power supply smoothing and filtering
DC-DC converter input/output filtering
Audio signal coupling and bypassing
General-purpose decoupling for ICs

Standard Value  470µF 16V is a popular and readily available capacitor for generalpurpose electronics

Multiple Variants  Available in lowESR, hightemperature, and longlife versions for diverse applications

√ Ready to use - ensure correct polarity before installation

√ Long operational life available in hightemperature variants

= Package Includes =

Varies by seller:

Bulk packs (throughhole radial) 10 to 500+ pieces
Tape and reel (SMD) - 100 to 2,000+ pieces
Cut tape / loose pieces for prototyping

For switching power supplies, a lowESR, highripplecurrent variant (e.g., UPM series from Nichicon or KY series from ChemiCon) is recommended for reliable long-term operation

Choose a capacitor with a voltage rating higher than your circuit's maximum voltage (e.g., 16V for a 12V rail) for reliable operation

For general-purpose filtering, a standard series with 105°C rating provides a good balance of cost and performance

Typical DC bias capacitance loss in MLCC capacitors does not apply to aluminum electrolytic types - they maintain rated capacitance up to rated voltage

This capacitor is ideal for linear power supply output filtering and battery-powered circuit decoupling

Avoid exceeding the rated voltage of 16V this is critical for safety and reliability

Avoid overheating during soldering typical soldering time is ≤5 seconds at ≤260°C

Avoid storing at high temperatures accelerated aging reduces lifetime