WH148 Carbon Film Potentiometer 3PIN 15MM 100K – KSH 40 at HIMA TRONICS Mombasa – Top quality capacitors and resistors. Best electronics in Kenya. Shop now for Arduino, ESP32, sensors and IoT devices.
Home / Capacitors and resistors / WH148 Carbon Film Potentiometer 3PIN 15MM 100K

WH148 Carbon Film Potentiometer 3PIN 15MM 100K

SKU: HMJ1054 Category: Capacitors and resistors
KSH 40.00
Out of Stock
Inquire
Product Description

WH148 Carbon Film Potentiometer 3PIN 15MM 100K

= SingleGang Linear Potentiometer with 15mm Shaft for HighImpedance Control Applications =

The WH148 B100K is a singlegang (3pin) carbon film rotary potentiometer featuring a 100K ohm resistance, a linear (Btaper) response curve, and a 15mm shaft length. This compact 16mm diameter component is ideal for highimpedance audio circuits, guitar tone controls, tube amplifiers, and precision single-channel applications.

Resistance value: 100K ohms ±20% tolerance
Linear (Bcurve) taper resistance changes proportionally with rotation angle
Single-gang design with 3 pins (input, wiper, ground)
Total mechanical rotation: 300° ±5°
Ensure proper wiring identification - pin 1 (input/high), pin 2 (wiper/output), pin 3 (ground/low)
Do not exceed 200V maximum operating voltage

= Technical Specifications =

ParameterValue
Resistance100K ohms ±20%
TaperLinear (BCurve) resistance changes linearly
Number of Gangs1 (Single)
Number of Pins3 (1 input, 1 wiper, 1 ground)
Rated Power0.063W (B-curve)
Max Operating Voltage200V (B-curve)
Shaft Length15mm / 0.59 inches
Shaft Diameter6mm / 0.236 inches
Total Rotation Angle300° ±5°
Rotational Life10,000 cycles
Rotational Noise≤47mV
Operating Temperature-10°C to +70°C
Insulation Resistance> 100MΩ at DC500V

= Key Features =

SingleGang Design One independent potentiometer for mono or single-channel control

Linear (B) Taper - Predictable linear resistance change for precision adjustments

3Pin Configuration Simple inputwiperground connections

15mm Shaft Length - Standard length for panel mounting applications

High Resistance Value 100K ohms ideal for high-impedance audio and tube circuits

Low Rotational Noise - ≤47mV ensures clean, stable signal output

Compact 16mm Form Factor - Fits standard panel mounting applications

Carbon Film Element Reliable, costeffective resistive material for general-purpose use

== Applications ==

  • Guitar tone and volume controls
  • High-impedance mono audio circuits
  • Tube amplifier bias adjustments
  • Instrument preamps
  • Voltage divider circuits (high impedance)
  • Laboratory test equipment
  • Arduino/ESP analog input controls
  • Hobbyist and DIY electronics projects
15mm Standard Shaft - Compatible with most knobs and panel mounting hardware
100K High Resistance Popular choice for guitar circuits and highimpedance audio

√ Ready to use - standard 6mm shaft with nut and washer included

√ Low rotational noise - 47mV maximum for clean operation

√ 10,000 cycle durability longlasting performance

= Package Includes =

  1. 1x WH148 3-Pin Potentiometer (B100K, 15mm shaft)
  2. 1x Mounting Nut
  3. 1x Washer
For guitar tone control, this 100K pot works well with high-impedance pickups
For Arduino projects, connect wiper to analog input, outer pins to GND and 5V/3.3V
The 15mm shaft length is ideal for standard panel mount applications with most knob types
Identify pin functions: pin 1 = input/high, pin 2 = wiper/output, pin 3 = ground/low
This 100K value is widely used in guitar, audio, and general-purpose electronics
Potentiometer is also known as the RV16AF series in some markets

Avoid exceeding 0.063W power rating to prevent overheating

Avoid overtightening the mounting nut- as this can damage the shaft or housing