1/4W Metal Film Resistor
= High-Precision Resistor for Electronics Projects =
The 1/4W Metal Film Resistor is a high-quality passive electronic component designed for precision circuit applications. Featuring low noise, high stability, and tight tolerance, these resistors are essential building blocks for any electronics project, from simple LED circuits to complex microcontroller systems.
Metal film construction provides superior stability and low temperature coefficient
Available in various resistance values and tolerance options
Do not exceed 1/4W power rating - overheating will damage the component
= Technical Specifications =
| Parameter | Value |
|---|
| Type | Metal Film Resistor |
| Power Rating | 1/4W (0.25W) |
| Tolerance | ±1% (standard) |
| Resistance Range | Various values available |
| Temperature Coefficient | ±50ppm/°C |
| Maximum Voltage | 250V |
| Operating Temperature | -55°C ~ +155°C |
| Package Type | Axial Leads |
| Lead Material | Tinned Copper |
| Body Material | High-grade ceramic core |
| Coating | Flame-retardant epoxy |
| RoHS Compliant | Yes |
= Key Features =
High Precision - ±1% tolerance for accurate circuit performance
Low Noise - Ideal for audio and sensitive analog circuits
Stable Performance - Low temperature drift for consistent operation
1/4W Power Rating - Perfect for general purpose and signal circuits
Reliable Construction Highquality metal film deposition
Flame Retardant Safetycertified epoxy coating
Tinned Leads - Easy to solder
Color Coded Clear value identification with 5band coding
== Applications ==
- Power supplies and voltage regulators
- Audio circuits and amplifiers
- Signal processing and filtering
- Microcontroller interfacing
- LED current limiting
- Pullup and pulldown circuits
- Voltage dividers
- Oscillator circuits
- Sensors and measurement equipment
- Consumer electronics
- Prototyping and breadboarding
- Arduino and Raspberry Pi projects
= 1/4W Power Rating Guidelines =
| Voltage (V) | Current (mA) | Resistance (Ω) | Power (W) |
|---|
| 5V | 50mA | 100Ω | 0.25W |
| 12V | 20.8mA | 576Ω | 0.25W |
| 24V | 10.4mA | 2.3KΩ | 0.25W |
Power (W) = Voltage² / Resistance OR Current² x Resistance
Always choose resistor with power rating at least 2x calculated power
Continuous operation at maximum rating reduces lifespan
= Resistor Color Code =
The resistor value is indicated by 4 or 5 color bands:
- Band 1: First digit
- Band 2: Second digit
- Band 3: Multiplier
- Band 4: Tolerance (±1% = Brown)
- Band 5: Temperature coefficient (optional)
Use a multimeter to verify resistance before soldering
Always check color code reading with a meter
= Why Choose Metal Film Resistors? =
Superior to carbon film - lower noise and tighter tolerance
Longterm stability minimal value drift over time
Low temperature coefficient - consistent in varying temperatures
Flameretardant coating enhanced safety
1/4W rating - ideal for most electronic circuits
RoHS compliant - environmentally friendly
√ ±1% precision for accurate circuits
√ Low temperature drift
√ Excellent frequency characteristics
√ Low parasitic capacitance
√ Suitable for PCB and breadboard
√ Ideal for professional and hobbyist use
= Installation Guidelines =
- Identify correct resistance value using color codes
- Verify with multimeter before soldering
- Bend leads carefully - avoid damaging body
- Insert into PCB or breadboard
- Solder with appropriate temperature (≤350°C)
- Trim excess leads to 3-5mm length
Allow adequate spacing for air circulation
Use heat sink if operating near maximum power
Do not bend leads close to the resistor body
= Safety Precautions =
Do not exceed 1/4W power rating
Avoid mechanical stress on leads and body
Keep away from moisture and corrosive environments
Resistors may become hot - allow cooling before handling
Do not use damaged or overheated resistors
For high-voltage applications, maintain adequate spacing
Use series combination for higher voltage ratings
Avoid using in circuits exceeding 250V
= Common Formulas =
Ohm's Law:
- Voltage = Current × Resistance (V = I × R)
- Current = Voltage / Resistance (I = V / R)
- Power = Voltage² / Resistance (P = V² / R)
Series Resistance:
Parallel Resistance:
- 1/R_total = 1/R1 1/R2 1/R3 + ...
Use these formulas to design your circuits correctly
= Quick Reference =
| Attribute | Details |
|---|
| Type | Metal Film Resistor |
| Power Rating | 1/4W (0.25W) |
| Tolerance | ±1% |
| Mounting | Through-hole |
| Package | Axial leads |
| Body Color | Blue / Light Blue |
| Standards | RoHS Compliant |
= Maintenance and Storage =
√ Store in dry, anti-static environment
√ Handle by body to avoid lead damage
√ Keep away from strong magnetic fields
√ Check resistance periodically in critical applications
√ Replace if discolored or damaged
√ Store at room temperature
The 1/4W Metal Film Resistor - precision, reliability, and performance in one essential component. Perfect for all your electronics projects, from simple circuits to advanced systems.
| RESISTOR METALFILM 14W 1/4W RESISTANCE ELECTRONICS COMPONENTS DIY CIRCUITDESIGN AUTOMATION SENSORS ARDUINO #POWERSUPPLY | New | Best Seller | High Quality |
|---|
