5MM MIXED LEDS – KSH 20 at HIMA TRONICS Mombasa – Top quality displays. Best electronics in Kenya. Shop now for Arduino, ESP32, sensors and IoT devices.
Home / Displays / 5MM MIXED LEDS

5MM MIXED LEDS

SKU: HMJ109 Category: Displays
KSH 20.00
In Stock
Inquire
Product Description

5mm Mixed LEDs Assortment (Red, Yellow, Blue, Green)

= 4Pack Assorted Round ThroughHole LEDs for Electronics Projects =

This 4-piece set contains one each of the four most common indicator colorsRed, Yellow, Green, and Blue in a standard 5mm (T-1 3/4) round package. This assortment is perfect for prototyping, status indicators, and basic lighting in Arduino and electronics projects.
Four Basic Colors Included - 1 Red, 1 Yellow, 1 Green, and 1 Blue LED
Standard 5mm (T1 3/4) Package Fits 5mm LED holders and standard 2.54mm pitch breadboards
The long lead is the anode (+) and the short lead is the cathode (-).
A currentlimiting resistor (typically 220Ω1kΩ) is required to protect the LED.
The forward current must be limited to 20mA-30mA; exceeding this can damage the LED.

= Technical Specifications (Typical Values) =

ParameterValue
----
Package Type5mm Round (T-1 3/4)
Mounting TypeThrough Hole
Pin Spacing2.54mm (0.1 inch)
Max Forward Current20mA - 30mA
Typical Forward Voltage (Red, Yellow)~1.8V - 2.2V
Typical Forward Voltage (Green, Blue)~2.8V - 3.4V

Note: Specifications vary by manufacturer - check the datasheet for your specific model.

This assortment provides the essential colors for breadboard prototyping and experimenting with electronics . The different voltage requirements for each color ensure you can understand and test various LED configurations.

= Troubleshooting =

LED not lighting:

  • Check polarity (long lead = positive, short lead = negative).
  • Verify a current-limiting resistor is installed.
  • Ensure the supply voltage meets the forward voltage requirement.