Laser Toner Transfer Paper – KSH 50 at HIMA TRONICS Mombasa – Top quality pcb. Best electronics in Kenya. Shop now for Arduino, ESP32, sensors and IoT devices.
Home / Pcb / Laser Toner Transfer Paper

Laser Toner Transfer Paper

SKU: HMJ132 Category: Pcb
KSH 50.00
In Stock
Inquire
Product Description

Laser Toner Transfer Paper for PCB and DIY Projects

= Specialized Heat Transfer Paper for Laser Printers in PCB Fabrication =

Toner transfer paper is a specialized media designed to print circuit board designs using a laser printer, enabling DIY PCB fabrication. Unlike standard photo paper, its special coating allows the printed toner pattern to separate cleanly and transfer onto a copper board when heat is applied, eliminating the tedious task of peeling and scrubbing .

High Precision Transfer Capable of fine traces down to 0.006 inches for professionallooking PCBs .
Efficient and Clean - Minimal paper residue on the board, delivering a crisp, sharp toner layer ready for etching .
Designed for laser printers only; inkjet printers will not work as the toner is a heat-activated polymer .
For best results, use a household iron or a laminator set to 140-170°C to melt and adhere the toner to the copper .
Wash and dry the copper board thoroughly before application to remove grease and fingerprints for proper toner adhesion .

= Specifications =

ParameterValue / Detail
----------------------
Paper SizeTypically A4 (210 x 297mm) or Letter
Compatible PrinterLaser Printer only (Toner-based)
Transfer Temp140°C to 170°C
Common UsesDIY PCBs, Dry Transfer Graphics

This specialized paper is the basis for creating precise circuit boards at home . The coating on the paper acts as a barrier, allowing the melted toner to be released and transferred onto the prepared copper surface . This method is significantly faster and more reliable than amateur painting or sticker methods .