ESP32-S3-DevKitC-1 – KSH 1,500 at HIMA TRONICS Mombasa – Top quality microcontrollers. Best electronics in Kenya. Shop now for Arduino, ESP32, sensors and IoT devices.
Home / Microcontrollers / ESP32-S3-DevKitC-1

ESP32-S3-DevKitC-1

SKU: HMJ528 Category: Microcontrollers
KSH 1,500.00
In Stock
Inquire
Product Description

ESP32S3DevKitC-1 Development Board

= EntryLevel WiFi + Bluetooth LE MCU Module for AIoT Projects =

The ESP32S3DevKitC1 is an entrylevel development board equipped with ESP32S3WROOM1, ESP32S3WROOM1U, or ESP32S3WROOM2 modules, providing a generalpurpose Wi-Fi + Bluetooth LE MCU platform . Most I/O pins are broken out to pin headers on both sides for easy interfacing with peripherals or breadboard mounting .

Powerful AIoT Processing Xtensa 32bit LX7 dual-core processor up to 240MHz
Rich Peripherals - SPI, LCD, Camera interface, UART, I2C, I2S, USB OTG, ADC, and more
Operating Voltage: USB 5V (via MicroUSB or USBC) or via 5V/3.3V pins
Flash/PSRAM Options: 8MB Flash 8MB PSRAM (N8R8), 32MB Flash 16MB PSRAM (N32R16V)
Use USBtoUART port (Micro-USB) for programming; native USB port supports JTAG debugging and USB OTG

= Key Components =

ComponentDescription
ESP32S3WROOM-1/1U/2Wi-Fi + Bluetooth LE MCU module with PCB antenna (1/2) or external antenna connector (1U)
USBtoUART PortMicro-USB port for power, flashing, and serial communication
Native USB PortFull-speed USB OTG interface for programming, power, and JTAG debugging
Boot ButtonHold while pressing Reset to enter Firmware Download mode
RGB LEDAddressable RGB LED (GPIO38 on v1.1, GPIO48 on v1.0)
5V to 3.3V LDOPower regulator converting 5V input to 3.3V output

= Ordering Variants =

Ordering CodeModuleFlashPSRAM
N8R8ESP32S3WROOM1N8R88MB QD8MB OT
N32R16VESP32S3WROOM2N32R16V32MB OT16MB OT
1U-N8R8ESP32S3WROOM1UN8R88MB QD8MB OT

= Key Features =

+Power Supply Options USBto-UART port, native USB port, or 5V/3.3V pins

Bootloader Support - Hold Boot Reset for firmware download mode

+USBtoUART Bridge - Up to 3 Mbps transfer rate for fast programming

+Addressable RGB LED - Onboard indicator driven by GPIO38/48

+All Pins Broken Out - Most GPIO pins available on side headers except SPI flash/PSRAM pins

== Applications ==

  1. Wake-word detection and voice command recognition
  2. Face detection and recognition systems
  3. Smart home and smart appliance control
  4. Smart control panels and smart speakers
  5. Industrial AIoT and edge computing projects
Versatile AIoT Platform - Ideal for AI and machine learning applications
Rich Ecosystem Supports ESPIDF, Arduino, CircuitPython, and MicroPython

√ Compatible with ESPIDF v4.4+ and ArduinoESP32

√ Onboard USBtoUART for easy programming

√ Available with multiple Flash/PSRAM configurations

= Troubleshooting =

Board not detected:

  • Use a datacapable USB cable (not chargeonly)
  • Ensure correct USBtoUART port is connected (Micro-USB)
  • Install CP210x USBtoUART drivers if needed

Programming fails:

  • Hold Boot button while pressing Reset to enter download mode
  • Select the correct board (ESP32S3DevKitC-1) in IDE
  • Check that the correct port is selected for serial communication